Emergency Light Monitoring System, OZELMS-25

The Emergency Light Central Monitoring System is capable to test, monitor and maintain up to 250 pieces of emergency luminaires. It comes with automatic testing, data analysis and result judgement. One-key fire drill function enable this system to test device connected to the control panel, lower maintenance cost and realize fire marshals hands.

Introduction

Technical Data Sheet

Datasheet

Specification

Description                         Addressable Emergency Lighting Control Panel
Power Supply                    AC 100-240VAC/50-60HZ
Consumption                     25W (0.15A AC)
Battery Type                      Sealed lead-acid battery 12V / 7AH Max
Charger                                 Stabilized power supply 13.8V / 400Ma
Loop Circuit                        The maximum number of addressable modules connected to the
panel is 250. (2 loops, 130 each loop)
24v output                          General outputs with a 24VDC 300ma rating.
Display                                 4.3inch touch screen
Maximum Load                 The maximum load connected to the panel must not exceed 0.6A.
Ingress protection           IP 30
Humidity                              Up to 95% relative humidity
Constructional                   Material ABS
Dimensions                        322 x 241 x 97mm
Weight                                 1400 gr
Standard                              EN 50172, EN 50130-4, EN 61000-6-3, IEC/EN 62034
Compliance                        TUV-CB, COC

Why is Emergency Lighting so important?
It is essential that all occupied buildings should have escape lighting to allow for safe exit should mains power fail. Emergencies luminaires have fitted back up batteries which are continuously charged during standard operation and have at least 3 hours of power. Lights must be installed to provide sufficient illumination according to the different areas of premises and must conform to the latest legislation.

Emergency Light Fittings

There are two basic types of emergency lighting luminaires – maintained and non-maintained.

Maintained, these luminaires have the advantage of being able to be switched between the maintained function (lamp illuminated at all times) and non-maintained (lamp off until power supply fails), making them ideal for applications such as corridors, workshops and permanently illuminated emergency exit signs. The maintained luminaires also have the facility of being switched in banks of up to ten units.

Non-maintained, these luminaires are only illuminated on a failure of the mains supply. Ideal for emergency exits, switch rooms and storage areas.